Blowing one or two eggs is not hard, really. You can have them done in time for dinner. When you have to do a bunch for Easter, it starts to get uncomfortable. Really uncomfortable. Your mouth hurts, your lips go numb, and your back starts to give out from being hunched over a bowl for so long.
The following are things I’ve figured out from trial and error to make your egg-blowing life easier.
No point getting your equipment out and cleaning it and getting set up… to do one or two eggs. Do a lot at a time. It doesn’t take a lot of brain power to do it, so you can sit in front of the News and see how many you can do in half an hour. You’ll be surprised when you get the hang of it.
Store your blown, cleaned, dried eggs in egg cartons, ready for use when the time comes. Don’t worry, they won’t go bad.
A Good Seal
Eggs are an inconvenient design for blowing. If they were straw-like, all good. But they aren’t. They’re smooth, and slightly rounded and it takes a bit of practice to make a positive seal with your mouth on the top of the egg.
Ever have Grolsch? You know that little rubber ring on the inside of the crown? Pick that out, wet it a little and use it as a barrier between your lips and the egg. Not only will it save you the embarrassment of making little fart noises as you blow, and not only will it improve your blowing power, it’s a good excuse to buy beer.
They last for yonky donks, too. AND you can use them for some advanced designs (but that comes later). You know what? Go and get a beer right now and then come back, OK?
Grinding a hole
Puncturing the primary hole with a stylus or pin is a little risky. If the egg is fresh and the shell isn’t thin, it’s not a problem, but take either of these two things away and you need to tread carefully (Insert your own walking on eggshells pun).
Do you have a drill? That’s a bit of overkill. Do you have a high-speed rotary tool like, oh, I don’t know, a Dremel? You do? That’s fantastic! Because if you get yourself a teeny, tiny drill bit, or pointed grinding bit, you can carefully grind a neat, countersunk hole for the primary, no sweat.
The other benefit is that you can use your Dremel for grinding patterns into eggs (later), or making holes to recess crystals (later), or cutting the top off for a egg-box (later).
Blowing an egg relies on increase the air pressure on one side of the innards, such that it forces it out the other side. What if we lower the pressure on the primary hole, so that the air pressure on the other end pushes it through? Net effect: Goop comes out.
This is called sucking eggs. Whoa, whoa, whoa! Don’t click that close button. You don’t have to do the sucking yourself. OK? In fact, it could be quite hazardous if the egg has anything nasty internally. I prefer to cook my eggs before I eat them.
So what to use? Wait for it: A breast pump! Whoa, whoa, whoa! Come on, give me a chance, here! It’s actually designed to do exactly what’s required: Lower the air pressure on one side, letting the pressure on the other push the innards through. And, to boot, the pumps have a collector that you can use.
No bowl! No mess! No fuss! You just look a little creepy, is all. Just be sure of three things:
- Clean your pump after each use
- Ensure that the egg is large enough to not get sucked into the aperture (these things were designed for something larger, of course)
- MAKE SURE THAT YOU DON’T USE ONE THAT IS CURRENTLY (OR EVER) IN USE FOR GETTING BREAST MILK FOR A CHILD.
All jokes aside, that last point is very important. I marked my pump with a permanent marker and keep it stored in my art supply cabinet. You don’t want to risk giving a bub raw egg, no matter how thoroughly you clean it.
You know those little tripod things that come on the pizza that stop the top of the box from squishing it? Let me find one…
There. One of those. Next time you order pizzas, keep these, turn them upside down and, presto! Instant egg holder! You can use these to stand your eggs upright while they drain, or to let them dry after painting, or even for showcasing (but decorate them first).Hmm, first beer, now pizza. This is a hobby worth pursuing.
Say what? ‘Snot Suckers’. Oh. Unpleasant name, it’s pretty much a rubbery thing one uses to clear mucous from a baby’s nose when they’re all clogged up. Normally one would use it in ‘suck’ mode but in this case you’d let the aspirator nozzle act as your lips. Squeeze the bulb (or push the plunger, depending on your model) and blow the contents out.