As you saw from the Deviled eggs and eggs Benedict, having ‘pairs’ or ‘themes’ of eggs is a fun way to mix things up at Easter. And there’s a good chance that if someone doesn’t like variant A, they can have B.
Mark Twain’s The Prince and the Pauper was favourite story when I was a tacker, I’ve heard many variants, and the theme is common in movies and books. I chose to take an Indian variant with this pair.
Note that the eggs are ‘inverted’ in that the smaller or pointier bit is at the bottom. This makes wrapping the turban a lot easier. It also means the primary hole will be covered by the turban.
Start with a coating of skin-coloured paint. While that’s drying, cut three 1″ pieces of ribbon and use craft glue to stick these lengthways on the top of the head. This will cover the gap formed once the herringbone pattern is made.
Once these are dry, dab some craft glue on the ribbon, and tightly wrap it around and around the head, dabbing with glue on each turn to hold it in place. Keep it tight, making sure the distance between wraps is consistent.
Pro tip: Fast acting glue is a life-saver here.
Once you have enough turns, glue the tail of the ribbon in place and trim.
If you need diagrams for this, just let me know.
Now comes the decorating: Get a chicken feather and glue it into a fold. Add some craft diamantes to enhance the asymmetry and, finally, glue on some eyeballs!
Try varying the ribbon, jewel and feather colour. Black and red, for example, is striking. Blue and gold. Green and white. The choice is yours!
The egg is inverted, as with the Prince, but now we need to make him disheveled. Get a bit of foam and ‘blot’ the skin to make it rough and textured. Give him some stubble (he’s a teenager pauper) and small, sad eyes.
Now, for the turban: Go to your favourite material shop and buy some lightly patterned cotton. I’ve gone with red and white stripes here, which I also used for the cowboy egg’s neckerchief. Cut it into long strips, fraying the ends and roughing it up here and there.
He’s a pauper, remember?
As with the Prince, cut three 1″ bits and glue onto the top of his head to cover the ‘gap’ made in the middle of the turban. Start the length off with a dot of glue, wrap around herringbone style, gluing on each pass. You can afford to be a bit sloppy with the turns, don’t try to hold it as tight.
With the last turn, glue it into place but don’t trim it. Let it fall freely.